Radio Shack ET-1118 Storing a Caller ID Record to the HANDSET’S Memory, Caller ID Messages

Caller ID Messages

Display	Description
New:XX	Shows the number
Total:XX	of new Caller ID
	records (records you
	have not reviewed)
	and the total number
	of records.
Private	The caller has
Name	blocked the Caller ID
	information from
Private
	being sent.
Number
Unknown	The caller is not
Name	within a Caller ID
	service area.
Unknown
Number
Incomplete	Appears if there was
Data	an error during the
	transmission of
	Caller ID informa-
	tion. Minor electrical
	disturbances can
	affect Caller ID infor-
	mation. Occasional
	errors are normal. If
	the phone fre-
	quently displays
	Incomplete Data,
	contact your local
	telephone company
	or RadioShack store
	for assistance.
End	Appears when you
	scroll past the last
	Caller ID record.

DIALING NUMBERS FROM A CALLER ID RECORD

To dial a local number stored in a Caller ID record, recall the record, then press TALK. If it is a long distance call, press 1 (1 appears before the displayed num- ber) before pressing TALK.

Note: If a Caller ID record does not con- tain a phone number (if it was blocked by the caller) you cannot dial from that record.

STORING A CALLER ID RECORD TO THE HANDSET’S MEMORY

Follow these steps to store the name and number from a Caller ID record into a handset memory location.

Note: To store a record from a Caller ID record into the base memory, recall the record, follow steps in “Storing a Num- ber in the Base’s Memory” on Page 19.

1.Recall the record you want to store, then press MEM. Select Loca- tion appears.

2.Choose a memory location by pressing its number (0–9) or scroll- ing the list using or , then press

SELECT.

If the selected location is empty, the phone beeps to confirm that it stored the number, then the Caller ID record ap- pears.

23