Radio Shack ET-1118 owner manual Storing Your Area Code

3.Press SELECT to change the Caller ID/Call Waiting setting. On or Off appears indicating the selected set- ting.

4.Press CALL ID or return the handset to the base to store the new setting.

STORING YOUR AREA CODE

To quickly dial a number from a Caller ID record (see “Dialing Numbers from a Caller ID Record” on Page 23) or to cor- rectly store a number from a record into a memory dialing location (see “Storing a Caller ID Record to the Handset’s Memory” on Page 23), you must store your local area code in the ET-1118’s memory. Then, when you dial from a Caller ID record, the ET-1118 skips the area code if it matches the one you stored.

Follow these steps to store your area code.

1.Lift the handset then hold down

CALL ID.

2.Press 3 (or twice) to select Area Code.

3.Press SELECT, then enter your 3- digit area code. If you make a mis-

take, repeatedly press or to move the cursor over the incorrect digit, then enter the correct number.

Note: If an area code is already stored, it appears on the display. To delete the area code, press DELETE

three times. Then enter your area code.

DELETE

4.Press SELECT to store the area code.

5.To clear the display when you finish, press CALL ID or return the handset to the base.

13