7.Press SELECT. The phone beeps and Memory n Stored appears. After 2 seconds, Memory Store appears, and you can repeat Steps
To replace a stored number, simply store a new one in its place.
Editing or Deleting a Number in the Handset’s Memory
1.Lift the handset.
2.Hold down MEM until Memory Store and a list of memory loca- tion numbers appear on the display.
3.Choose a memory location 
or 
.
4.Press SELECT. The options listed
below appear. Press 
or 
to choose an option, follow the instruc- tions listed, then press SELECT.
Edit Memory n — Edit the record as described in Steps 5 through 7 of “Storing a Number in the Handset’s Memory” on Page 16.
Delete Memory n — The display prompts you to confirm the deletion. Move the cursor to Yes, then press SELECT or DELETE. The phone beeps, and Memory n Deleted appears.
Go Back — Returns you to the list of memory numbers.
5.When you finish editing or deleting memory numbers, press MEM or
return the handset to the base to exit the Memory Store display.
Storing a Number in the Base’s Memory
Note: An error tone sounds and the phone exits the storing process if you wait more than 20 seconds between each keypress.
1.Press MEM. The IN USE indicator blinks.
2.Enter the number (up to 16 digits) and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 16 and “Entering a Pause” on Page 20).
Notes:
•An error tone sounds and the phone exits the storing process if you enter more than 16 digits.
•Each tone or pause entry uses one digit of memory.
3.Press MEM again, then enter the memory location number
To replace a number in the base’s mem- ory, simply store a new number in its place. To erase a memory number, press MEM twice, then press the memo- ry location number
19
