Blaupunkt Acapulco MP52, Daytona MP53 Adjusting the digital equalizer, EQUALIZER ACAPULCO MP52

EQUALIZER (ACAPULCO MP52)

Cancelling automatic calibration

If you want to cancel automatic calibra- tion,

➮briefly press the DEQ+ < or OK ; button.

Adjusting the digital equalizer

Besides the automatic sound calibra- tion, you can also manually adjust a parametric 5-band equalizer.

In this case, parametric means that one frequency can be boosted or reduced (GAIN +8 to -8) individually for each of the five bands.

The following bands are available:

●	SUB LOW EQ	32	- 50 Hz
●	LOW EQ	63	- 250 Hz
●	MID EQ	315 - 1,250 Hz
●	MID/HIGH EQ	1,600 -		6,300 Hz
●	HIGH EQ	8,000 -		12,500 Hz

These bands can be set without the need for measuring equipment. They will allow you to significantly influence the sound characteristics in your vehi- cle.

Notes on adjusting the settings

We recommend you use a CD that you are familiar with for making changes to the settings.

Before adjusting the equalizer, set the sound and volume distribution settings to zero and deactivate loudness. For further details, refer to the chapter enti- tled “Tone and volume balance”.

➮Listen to the CD.

➮What kind of impression does the sound make?

➮Now read the “Sound impression” column in the table entitled “Help adjusting the equalizer”.

➮Adjust the equalizer values as de- scribed in the “Measures” column.

Adjusting the equalizer

➮Press the DEQ+ button <.

➮Press the or button : to se- lect “DIGITAL EQ”.

➮Use the or button : to select “USER EQ1”, “USER EQ2” or “USER EQ3” equalizer that you want to adjust.

➮Press the or button : to se- lect the filter.

➮Press the or button :.

➮Press the or button : to se- lect the frequency.

➮Adjust the level using the or button :.

➮To select the next filter, first press the OK button ; and then the or button :.

➮When you have finished making all

your adjustments, press the DEQ+ button <.

64