Storing stations automatically Travelstore | Blaupunkt CD51 specification

RADIO MODE

Storing stations automatically (Travelstore)

You can automatically store the six sta- tions with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range.

Note:

●Stations that were previously stored in this memory are deleted in the process.

➮Briefly press the TS button ?.

The station storing procedure begins. “TRAVEL-STORE” appears in the dis- play. After the process is completed, the station that is stored in location 1 of the respective memory level will be played.

Listening to preset stations

➮Select the memory level on which the station was stored.

➮Press the preset station button 1-6>of the station you want to listen to.

Scanning receivable stations (SCAN)

You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu.

Starting SCAN

➮Keep the OK button ;pressed until the scan process starts.

“SCAN” appears briefly in the display followed by the current frequency (which flashes).

Stopping SCAN and continuing listening to a station

➮Press the OK button ;.

Scanning is stopped and the station that was tuned into last will remain active.

Setting the scantime

➮Press the MENU button 8.

➮Keep pressing the or button :until “SCANTIME” appears in the display.

➮Set the required scantime using the and buttons :.

When you have finished making your changes,

➮press the MENU button 8or OK ;twice.

Note:

●The set scantime also applies to scanning in CD and CD changer mode.

Tuner configuration

This unit is equipped with a multiband tuner. The tuner can be configured to suit the requirements that are specific to various countries. The countries/re- gions available are: America, Europe, Asia and Thailand. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated.

Configuring the tuner