Epson S1D13705 Ically for configuring 8-bit color STN panels, Format 2 data format

Epson Research and Development	Page 13
Vancouver Design Center

Format 2	Selects color STN panel format 2. This option is specif-
	ically for configuring 8-bit color STN panels.
	See the S1D13705 Hardware Functional Specification,
	document number X27A-A-001-xx, for description of
	format 1 / format 2 data formats. Most new panels use
	the format 2 data format.
Frame Repeat	Selects Frame Repeat feature for use with EL panels.
	See the S1D13705 Hardware Functional Specification,
	document number X27A-A-001-xx, for description of
	Frame Repeat.
Data Width	Selects the panel data width. Panel data width is the
	number of bits of data transferred to the LCD panel on
	each clock cycle and shouldn’t be confused with color
	depth which determines the number of displayed colors.
	When the panel type is STN, the available options are 4
	and 8 bit. When an active panel type is selected the
	available options are 9 and 12 bit.
Panel Color	Selects between a monochrome or color panel.
Mask FPSHIFT	When selected causes the signal FPSHIFT to be
	masked. When color or TFT panel is selected this
	option is disabled.
Dual Panel	Selects between single or dual panel.
	When the panel type is TFT, “Single” is automatically
	selected and the “Dual” option is greyed out.
Polarity	These settings define the polarity of the FPLINE and
	FPFRAME pulses.
FPLINE Polarity	Selects the polarity of the FPLINE pulse. Refer to the
	panel specification for the correct polarity of the
	FPLINE pulse.
FPFRAME Polarity	Selects the polarity of the FPFRAME pulse. Refer to the
	panel specification for the correct polarity of the
	FPFRAME pulse.

13705CFG Configuration Program	S1D13705
Issue Date: 02/03/11	X27A-B-001-03