Page 6

Epson Research and Development

 

Vancouver Design Center

 

 

2.Type the following command at the root of the Project source tree (gddk_v1.00 direc- tory):

services/graphics/tests/bench/nto/x86/o/bench -dlhardware/devg/S1D13705/ nto/x86/dll/devg-S1D13705.so -mW,H,C,F-d0x0,0x0

Where:

W is the configured width of the display H is the configured height of the display C is the color depth in bpp (i.e. 8)

F is the configured frame rate

This command starts the bench utility which will initialize the driver as the secondary display and exercise the drivers main functions. If the display appears satisfactory, restart QNX Photon and the restart will result in the S1D13705 display driver becoming the primary display device.

Comments

To restore the display driver to the default, comment out changes made to the trap file graphics-trapfile.

S1D13705

QNX Photon v2.0 Display Driver

X27A-E-005-01

Issue Date: 01/09/10

Page 280
Image 280
Epson S1D13705 technical manual Comments