Epson S1D13705 technical manual Epson Research and Development

Epson Research and Development	Page 5
Vancouver Design Center

Note

Mode0.h should be created using the configuration utility 13705CFG. For more infor- mation on 13705CFG, see the 13705CFG Configuration Program User Manual, docu- ment number X27A-B-001-xx available at www.erd.epson.com.

6.Open the S1D13705 workspace.

From the Tornado tool bar, select File->Open Workspace...->Existing->Browse... and select the file “x:\13705\8bpp\13705.wsp”.

7.Add support for single line comments.

The UGL v1.2 display driver source code uses single line comment notation, “//”, rather than the ANSI conventional comments, “/* . . . */”.

To add support for single line comments follow these steps:

a.In the Tornado “Workspace” window, click on the “Builds” tab.

b.Expand the “8bpp Builds” view by clicking on the “+” next to it. The expanded view will contain the item “default”. Right-click on “de- fault” and select “Properties...”. A properties window will appear.

c.Select the “C/C++ compiler” tab to display the command switches used in the build. Remove the “-ansi” switch from the line that con- tains “-g -mpentium -ansi -nostdinc -DRW_MULTI_THREAD”. (Refer to GNU ToolKit user's guide for details)

8.Compile the VxWorks image.

Select the “Files” tab in the Tornado “Workspace” window.

Right-click on “8bpp files” and select “Dependencies...”. Click on “OK” to regenerate project file dependencies for “All Project files”.

Right-click on “8bpp files” and select “ReBuild All(vxWorks)” to build VxWorks.

9.Copy the VxWorks file to the diskette.

From a command prompt or through the Windows interface, copy the file “x:\13705\8bpp\default\vxWorks” to the bootable disk created in step 4.

10.Start the VxWorks demo.

Boot the target PC with the VxWorks bootable diskette to run the UGLDEMO auto- matically.

Wind River UGL v1.2 Display Drivers	S1D13705
Issue Date: 01/02/13	X27A-E-003-02