Epson S1D13705 Int seGetScreenSizeint * Width, int * Height, Int seDelayint MilliSeconds

Page 54	Epson Research and Development
	Vancouver Design Center

int seGetScreenSize(int * Width, int * Height)

Description: Retrieves the width and height in pixels of the display surface. The width and height are derived by reading the horizontal and vertical size registers and calculating the dimensions. Virtual dimensions are not taken into account for this calculation.

When the display is in portrait mode the dimensions will be swapped. (i.e. a 640x480 display in portrait mode will return a width of 480 and height of 640).

Parameters: Width	- pointer to an integer to receive the display width
Height	- pointer to an integer to receive the display height
Return value: ERR_OK	- the operation completed successfully

int seDelay(int MilliSeconds)

Description: This function will delay for the length of time specified in “MilliSeconds” before returning to the caller.

This function was originally intended for non-PC platforms. Information about how to access the timers was not always available however we do know frame rate and can use that for timing calculations.

The S1D13705 registers must be initialized for this function to work correctly. On the PC platform this is simply a call to the C timing functions and is therefore independent of the register settings.

Parameters: MilliSeconds- time to delay in seconds

Return Value: ERR_OK - operation completed with no problems

ERR_FAILED- returned on non-PC platforms when the S1D13705 registers have not bee initialized

int seGetLastUsableByte(long * plLastByte)

Description: This functions returns a pointer, as a long integer, to the last byte of usable display memory.

The returned value never changes for the S1D13705.

Parameters: plLastByte	- pointer to a long integer to receive the offset to the last byte of
	display memory
Return Value: ERR_OK	- operation completed with no problems

S1D13705	Programming Notes and Examples
X27A-G-002-03	Issue Date: 02/01/22