Check, cancel and change programmes

22 ENTIMER RECORDING (cont.)

C Access the Programme screen.

Press " again to check more information. Each time you press ", the next programme’s information appears.

To cancel or change a programme...

D Cancel or change a programme.

Press & to cancel a programme. To change programme settings, press the appropriate button: START+/–, STOP+/–, DATE+/– and/or PR+/–.

E Return to the normal screen.

Press " as many times as necessary. If there are still some programmes remaining, go on to step 6.

F Return to the timer mode.

Press # (TIMER).

A Disengage the timer mode.

Press # (TIMER), then press 1.

B Access the Programme Check screen.

Press ".

Page 22

Image 22

JVC HR-J278EU specifications Check, cancel and change programmes, Cancel or change a programme, Return to the timer mode

Contents

Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVs Connect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mains Select your country Auto Set UpTurn on the recorder Before starting, make sure of the following Set the date and time Perform Auto Set UpSelect the language Press OK. The Language Set display appears on the TV screen 10 EN Language for the on-screen display Language Access the Main Menu screenAccess the Country Set screen Return to the normal screen Basic Playback 12 EN Variable Speed Search Slow MotionHigh-Speed Search Pause during playback Manual Tracking 14 ENInstant ReView Next Function Memory Index SearchSkip Search Repeat Playback 16 EN Watching Another Instant Timer Recording ITREngage the ITR mode Set the recording duration Tape Remaining Time Reset the counter18 EN Press -- so that a counter reading appears on the TV screen Playback Recording Express Timer Programming 20 EN Enter the channel position Engage the recorder’s timer modeTo Timer-Record Weekly Or Daily Serials Press PR + Return to the timer mode Check, cancel and change programmesCancel or change a programme Disengage the timer mode Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Edit From a Camcorder 24 EN Start the source player Set the input mode of recording deckAnother Video Recorder Start the recording deck Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is 28 EN About Ntsc Playback Clock Set Access the Clock Set screenStart the clock operation 30 EN Access the Auto Channel Set screenTuner Set Auto Channel Set View the Confirmation screen Perform Auto Channel SetPress OK 32 EN Delete a Channel Select the position. e.g Perform tuningSwap Channel Positions Select the channel to fine-tune Video Channel Set 34 EN Power 36 EN Recording Other Problems 38 EN Playback Delete a Channel Auto Channel Set Auto Set UpAnother Monochrome signal, 625 lines Power requirement AC 220 V 240 VdSignal system Horizontal resolution 250 lines