JVC HR-J278EU specifications 14 EN, Manual Tracking, Instant ReView

14 EN PLAYBACK (cont.)

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1 Override automatic tracking.

Press p on the remote control.

2 Adjust the tracking manually.

Press PR + or –.

● Press p again to return to automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the

Timer mode is disengaged.

Activate Instant ReView.

Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

● You can access a programme as far as 9 index codes away from the current tape position. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically.

● The Instant Review function will also operate if the recorder is turned on.

● The Instant Review function does not work during Power Save mode ( pg. 28).