EN 15
Index Search
Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
Activate Index Search.
Press w or e (2 or 6). “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press w or e repeatedly until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press w twice.
To locate the beginning of D from the current position, press e once.
Current position
Index number
●When the specified index code is located, playback begins automatically.
Skip Search
During playback, press 30 SEC 1 to 4 times to skip over unwanted sections. To resume normal playback, press 4.
●Each press initiates a
Next Function Memory
The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.
a- For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds. b- For Automatic Power Off
Press 3, then press 1 within 2 seconds. c- For Automatic Timer Standby
Press 3, then press # (TIMER) within 2 seconds.
Repeat Playback
Your recorder can automatically play back the whole tape 100 times repeatedly.
1Start playback.
Press 4.
2Activate Repeat Playback.
Press 4 and hold for over 5 seconds, then release.
●The Play indicator ( $) on the front display panel blinks slowly.
●After playing back a tape 100 times, the recorder stops automatically.
3Stop Repeat Playback.
Press 8 at any time.
●Pressing 4, 3, 5 or 9 also stops Repeat Playback.
