JVC HR-J278EU specifications Edit From a Camcorder, 24 EN

24 EN EDITING

Edit From A

Camcorder

Your recorder

Cable adapter (not provided)

Audio/Video

AUDIO OUTcable

(not provided)

Camcorder

VIDEO OUT

You can use a camcorder as the source player and your recorder as the recorder.

A Make connections.

Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s L-1 IN/OUT connector via a cable adapter.

B Set the recorder’s input mode.

Press AUX (NUMBER key “0”) and/or PR on the remote control to select “L-1”. You can select the input mode also by pressing 9[PR], and then 5[PR+] or 3 [PR–]on the recorder. See step 2 in “Basic Recording” (
pg. 16).

C Set the edit mode.

See “PICTURE CONTROL” on page 27.

D Start the camcorder.

Engage the Play mode of the camcorder.

E Start the recorder.

Engage the Record mode of the recorder.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

Player