JVC HR-J278EU specifications Another Video Recorder, Set the input mode of recording deck

EN 25

Edit To Or From

Another Video

Recorder

A
TV receiver		Player	Your recorder
		21-pin SCART cable
		(not provided)
Video	RF cable
channel or	(provided)
AV mode
		Another recorder
		Recorder
B
Recorder		Your recorder		TV receiver
21-pin SCART cable			RF cable	Video
			(provided)	channel
	(not provided)
	Another recorder
Player

You can use your recorder as the source player or as the recording deck.

A Make connections.

Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated.

B Set the input mode of recording deck.

With this video recorder, press AUX (NUMBER key “0”) and/or PR on the remote control to select “L-1”. You can select the input mode also by pressing 9[PR], and then 5[PR+] or 3[PR–]on the recorder. See step 2 in “Basic Recording” (
pg. 16).

●When using another recorder as the recording deck, refer to its instruction manual.

C Set the edit mode.

See “PICTURE CONTROL” on page 27.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting (
pg. 27).