JVC HR-J278EU specifications 28 EN, About Ntsc Playback

28 EN	SUBSIDIARY SETTINGS (cont.)
	* The default setting is bold in the table below.
8 POWER SAVE	When this function is set to “ON”, you can reduce the
ON	power consumption while the recorder is turned off.
OFF	NOTES:
	● During Power Save mode ...
	... the front display panel will be turned off.
	... the picture may be distorted momentarily when you turn on/
	off the recorder.
	● Power Save does not work when the recorder is in the Timer
	mode.
8 COLOUR SYSTEM	You can play back PAL, NTSC and MESECAM tapes, or
PAL/NTSC: To record PAL signals, or play back a	record PAL and SECAM* signals on this recorder. Select the
PAL or NTSC tape.	appropriate colour system.
MESECAM: To record SECAM signals, or play	* SECAM signals will be recorded as MESECAM on this recorder;
back a MESECAM tape.	MESECAM is the designation for tapes with SECAM signals that
	have been recorded on a MESECAM-compatible PAL video
	cassette recorder.
	NOTES:
	About NTSC Playback
	● Some TVs shrink the picture vertically and place black bars at
	the top and bottom of the TV screen. This is not a malfunction
	on the part of either the video recorder or the TV.
	● The picture may roll up and down. This can be corrected using
	the V-HOLD control found on some TVs. (This cannot be
	corrected if the TV does not have a V-HOLD control.)
	● The counter and tape remaining time readings will be incorrect.
	● During search, still, or frame-by-frame playback, the picture will
	be distorted, and there may be a loss of colour.
	● Depending on the type of TV, the top and bottom portions of
	superimposed displays may be cut off during NTSC playback.