Adjusting the Viewing Angle Brackets
Adjust the viewing angle brackets (one on each side of the phone) to position the phone to the desired viewing angle. Take care to keep the right side bracket on the right side of the phone and the left bracket on the left side of the phone. These brackets are not interchangeable. The character R or L appears on the inside of each bracket to indicate proper installation.
The brackets are adjusted by removing them from the base and reattaching them at desired angle. To remove the brackets, insert your finger into the bracket opening (on the underside of the bracket) and press up as you pull the bracket straight out from the side of the phone. To attach the brackets, use alignment guides (small marks) on the side of the phone and on the brackets as you snap them in place.
Counter Top Angle |
Desk Top Angle |
WALL MOUNTING
Wall Mounting Angle
The telephone may be installed on the studs of a standard wall phone plate or onto two screws (not included) fastened into the wall. When installing screws, use wall anchors (not included) to insure that the screws are secure.. To install screws properly, remove the template from page 36 of this manual and use it to mark the screw locations on the wall. Insert the screws into the wall leaving 3/16" of each screw extending out from the wall.
Expansion | #6 or #8 Pan Head |
Anchor | Self Tapping Screw |
(Not Included)
15
