TELEPHONE OPERATIONS SETUP
LIST OF SYSTEM DEFAULTS
The default telephone setup is as follows:
Function | Default |
Tone/Pulse Mode | Tone |
Headset | Disable |
Extension Number | 11 |
Ringer | On — 4 lines |
Line Connection | On — 4 lines |
Speaker Volume | 12th level |
Handset Volume | Minimum level |
Headset Volume | Middle level |
Ringer Volume | Middle level |
Speed Dial | Empty |
Area Code | Empty |
You may clear all programmed data and all the parameters will revert to the above default values. To do this:
1.Press [STORE].
2.Press [*], [#], [*], [#].
3.Press [MUTE].
4.A short ring will be heard to signal successful programming.
ASSIGNING EXTENSION NUMBERS (11 THROUGH 22)
When you use two or more telephones, each telephone must be assigned a different extension num- ber. If two stations are given the same number, you will hear a loud continuous warning alerting you to the system error.
All phones arrive with the default extension number 11. Valid extension numbers are 11 through 22. To program extension numbers, follow these steps, assigning numbers sequentially to each extension:
1.Press [STORE].
2.Press [1], [0].
3.Enter 2 digits XX where XX is a number from 11 to 22.
4.Press [MUTE].
5.A short ring will be heard to signal successful programming.
17
