45’ Installation
I
•Confirm that
•Attach brackets (L) and (R) using the hexagonal bolts (M5 x 8).
•Attach brackets (L) and (R) to their respective brackets (B) using the hexagonal bolts (M6 x 20) and the hexagonal nuts (M6).
•Pull back the carpet and determine where to attach the unit.
•Stick the supplied
to the bottom of the brackets (B) and peel off the paper backing.
•Affix the unit to the floor by pressing in place.
0A • Using a knife, cut Y’s in the carpet directly above the brackets (B) bolts.
• Return the carpet to its original
position allowing the bolts to protrude through.
I
Q • Remove the hexagonal nuts and take off the changer.
e • Once more, use the hexagonal nuts to attach the changer on top of the carpet.
10
