Radio Operation

Last Station Memory

Each FM bank and AM band has its own last station memory which holds last-tuned frequency for that band or bank irrespective of whether that frequency is stored into a preset.

Selecting Bands

Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.

Seek Tuning

Press or to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity requirements predetermined by sensitivity set through SENS button.

Tuning Sensitivity (SENS)

Press SENS for more that 2 seconds to switch between local (lo) and distant (dx) search sensitivity.

Radio Reception Hints

When listening to weak or distant AM stations, adjusting the Treble to minimum (-7) will reduce noise and improve sound.

In general, set SENS to DX if in rural areas or where stations tend to be weak and distant, and to LO when in metropolitan areas or where stations tend to be strong and local.

Stereo Symbol

Stereo symbol turns on if a stereo station with a sufficiently strong signal is received. The unit gradually switches between mono to stereo automatically.

Manual Tuning

Press or for more than 1/2 second and frequency will go one channel/step in direction pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode after 4 seconds or after storing a station on a preset.

Preset Station Storage

After tuning desired frequency on desired band, press and hold a Preset Button for more than 2 seconds to store current frequency. Audio is muted during storage, preset number appears, and beep acknowledges storage.

Preset Station Selection

Press desired Preset Button.

Travelstore

In any FM Bank, press TS for 2 seconds to activate FM Travelstore. (In AM Bank, press it for 2 seconds to activate AM Travel Store.) “TS” appears. Beginning at the bottom of the band, TS stores five relatively strong stations and returns to preset 1. To cancel search operation, press TS, any present button or the or key.

Station Scan Tuning

Press SCA. Frequency blinks during scanning. Unit stops at receivable stations for 4 seconds. Unit continuously scans until user stops scan by pressing SCA, another tuning button or SRC.

DEUTSCH

ENGLISH

FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

29

Page 13
Image 13
Blaupunkt CR 47 operating instructions Radio Operation