Condensed instructions
;CDC
Switch to changer mode (only if a changer is fitted).
If a changer is not fitted, AUX is selec- ted. Condition: AUX ON must be se- lected in the DSC menu.
<CD
Switch to CD mode
=TU (TUNER)
For switching to the radio mode, for toggling between FMI, FM II, TS (Trav- elstore), AM and AMT memory levels/ frequency bands.
>Slot for CD
When the CD is inserted with the label facing upwards it is automatically transported into the operating position. CD play mode is selected automatical- ly.
?Visual anti-theft protection
The following conditions must be met if the LED is to flash as a visible anti- theft protection measure:
The unit is switched off; The control panel is open; The KeyCard is removed;
The ignition is off and LED ON is se- lected in the DSC menu (factory de- fault setting).
Further information: “Programming with DSC, LED ON/OFF”.
@KeyCard
The KeyCard must be inserted before the unit can be operated.
KeyCard
Inserting the KeyCard
To disengage the control panel, press key 1. The control panel folds down. Insert the KeyCard with the contact surface facing downwards (see dia- gram). Engage the control panel.
2
1
3
Remove the KeyCard following the procedure in reverse.
Important: read the information under “KeyCard
AEject
Hold the key for CD ejection down for approx. 2 seconds: the CD is ejected.
For safety reasons, the control panel must always be engaged whilst the vehicle is moving.
When leaving the vehicle, open the control panel and remove the Key- Card in order to prevent theft.
10
