adjusted

 

 

 

start

TIM-TIME

 

end

 

 

 

1.5 hours

 

 

1.5 hours

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The motor antenna will be extracted

Use the rocker button / to choose TIM-TIME in the DSC menu.

Press << or >> to call up the adjusted time.

If TIM OFF is displayed, the TIM function is deactivated.

Use the rocker button / to set the time.

Use << to move to the hours or >> to adjust the minutes.

Confirm your entry by

pressing -dBor DSC. The TIM-TIME is stored.

TIM will be active 1.5 hours before and after the adjusted TIM-TIME.

Also, TIM will automatically stay on standby for three hours after the radio was turned off. When TIM is activated, the display will briefly show “TIM ON” when the set is switched off.

Deactivating the TIM standby mode

Press DSC with the radio being turned on.

Use the / rocker button to select the item TIM TIME.

Press -dBand switch to TIM OFF with rocker button / (you find this item between the time settings for 23:00 and 0:00).

When TIM OFF is flashing,

press DSC or -dB.

If the motor antenna is retracted immediately after selecting TIM OFF, you can be assured that the TIM function is deactivated.

Warning

The motor antenna could be damaged in a car wash.

If you have a motor antenna installed, it will remain extracted after you have turned off the radio with the TIM function being activa- ted. The antenna may also be extracted in the car wash when the set is turned off and the TIM function activated.

TIM is deactivated (TIM OFF), if the motor antenna is retracted as soon as the set is turned off.

You can now drive through a car wash when the radio is off.

Do not switch on the radio until you have left the car wash.

If the display shows TIM ON when switching off the radio, then the TIM timer is activated. The motor antenna will remain extracted.

If you are sure,

that now and while being in the car wash you are outside the recording period around the adjusted TIM-TIME:

 

 

 

 

adjusted

 

 

 

 

start

TIM-TIME

 

end

 

 

 

1.5 hours

 

 

1.5 hours

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The motor antenna will be extracted

Switch off the radio and press TIM. The display briefly shows STBY OFF.

The antenna will then remain retracted when the radio is turned off (until the three-hour recording period starts).

Attention:

You should by all means deactivate the TIM timer (TIM OFF), if the adjusted recor- ding period is soon to start.

For this purpose:

Press DSC with the radio being activa- ted.

Use the / rocker button to select the item TIM TIME.

38

Page 16
Image 16
Blaupunkt RCM 104 Deactivating the TIM standby mode, Do not switch on the radio until you have left the car wash