Recalling stored stations
You can recall any stored station by pressing the corresponding preset button.
•Press FMT or M•L to select the wave- band. For FM, also choose the corre- sponding memory bank by pressing FMT until the desired bank is indicated in the display.
•Briefly press the corresponding preset button.
Preset scanning
You can have all of the stations stored in one waveband scanned by using the Preset Scan function. Choose the desired SCANTIME in the DSC menu.
•Briefly press PS.
All of the stations in that waveband will be scanned one after another.
Depending on which memory bank has been activated for FM, all of the stations in either I,
IIor the Travelstore level will be scanned. If a preset is not in use, it is skipped.
To stop the scan:
• Press the PS button once again.
The radio will continue to play the cur- rently scanned station.
Scanning stations with Radio Scan
Beginning with the station currently tuned in, you can scan the following stations. Choose the desired SCANTIME in the DSC menu.
To activate the scan:
•Press PS for about 2 seconds. Either the scanned frequency or the station name starts flashing in the dis- play. During the actual scan process, “SCAN” is flashing.
To continue listening to a scanned stati- on/switch the scan off:
•Briefly press PS.
If no station is selected during the scan, the scan function will be automatically switched off after the entire frequency band has been passed through. The radio will revert to the station the scan began from.
For more information, please also refer to chapter “DSC programming - SCANTIME”.
PTY
The PTY signal is transmitted along with the RDS data telegram and contains information on the program type. Program types e.g. are: news, current affairs, information, sport, etc. This enables you to choose a certain type of program according to your personal needs.
With PTY you are prepared for the future of RDS.
•Press the PTY button.
You can now use the preset buttons to choo- se one out of six different program types. In the PTY mode the preset buttons no longer have their original function (see also chapter “DSC programming - PTY SET”).
PTY and seek tuning
First switch on the PTY mode and choose a program type (e.g. 4 = sports). When the seek tuning function is activated via 
/
, the radio will only capture those stations which transmit the selected PTY code. If no such station is found, the radio returns to the original mode. The display shows “SPORT” for approximately 3 seconds.
PTY and scan
First switch on the PTY mode and choose a program type (e.g. 4 = sports). When the scan function is activated, the system will only sample those stations which transmit this PTY code.
34
