Blaupunkt RCM 104 Important notes, What you must know, Traffic safety, KeyCard

Never try to pull out the KeyCard by force. First, slightly push in the card, which will then be released (the display shows LEARNING), and then remove it.

Should you have lost your KeyCard, or if it has become damaged, please contact one of our authorised service partners to get a new card.

Important notes

What you must know!

Before starting to use your new car radio, you should carefully read through the following information.

Traffic safety

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.

Please keep in mind that you travel a di- stance of 14 m per second at a speed of only 50 km/h.

Should the traffic situation become particu- larly demanding, we would advise you not to use the radio.

When adjusting the volume, make sure that you are still able to hear all sounds coming from outside of the vehicle, so that you are always able to react to warning signals, for example from the police or the fire brigade.

Installation/connection

If you like to install your new car radio by yourself or add other audio components to the existing ones, then please read carefully the enclosed instructions on installation and connection.

Optical indication of theft protection	Blaupunkt also offers designer KeyCards for
When the car is stationary, you can let the	an additional fee.
	You can find the service providers listed in
KeyCard tongue flash in order to show that
	the car radio service register ( ). In case of
the set is theft-protected. DSC allows you to
	doubt, please contact the central service
adjust two different settings: LED ON or LED
	centre in your country for more information
OFF.
	on the next KeyCard service facility in your
For more information, please read through
chapter “DSC programming - LED ON/OFF”. vicinity.
	The following functions can be individually
KeyCard	stored with the KeyCard (1 and 2): bass,
This car radio cannot be operated unless the	treble, balance and fader settings, preset
	stations, loudness, TA (volume of traffic an-
corresponding KeyCard is inserted. The	nouncements), SPEECH (tone control for
KeyCard code is stored in the set.	speech programs), BEEP volume, SCANTI-
Turn on the set and introduce the KeyCard	ME, VOLFIX.
completely. The car radio is now ready for	Moreover, the parameters adjusted last such
operation. When inserting a wrong KeyCard,	as the waveband, station, TA priority, loud-
the display will show “----”.	ness, AF, CPS, Dolby B, RM, REG ON/OFF
After approximately 10 seconds the display	or seek tuning sensitivity remain stored.
shows CARD ERR.	With this, you will always find your basic
In this case do not go on operating the set	settings adjusted again after you have inser-
until you have the corresponding KeyCard	ted your KeyCard.
available.

DEUTSCH

ENGLISH

PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS

25