Blaupunkt RCM 104 Sampling stations briefly with Radio Scan, Sampling stored stations briefly

Now the station is stored. The activated pre- set button is indicated in the display.

Note:

Should you tune into a station which has already been stored, the corresponding pre- set button and the memory bank will start flashing in the display for a short while, if you have selected another memory bank.

Storing the strongest stations automatically with Travelstore

Recalling stored stations

You can recall any stored station by pressing the corresponding preset button.

•Press FMT or M•L to select the wave- band. For FM, also choose the corre- sponding memory bank by pressing FMT until the desired bank is indicated in the display.

•Briefly press the corresponding preset button.

Sampling stations briefly with Radio Scan

Starting with the currently played station, you may let the system sample the following ones one after another. Choose the desired SCANTIME in the DSC menu.

To activate Scan:

• Press PS/SCA for about 2 seconds.

The sampled frequency or the station

name starts flashing in the display. Du-

ring the actual search process, “SCAN”

You can use the Travelstore memory bank to	Sampling stored stations briefly
automatically store the six strongest FM sta-
	with Preset Scan
tions sorted on the preset buttons according
to their signal strength. This feature is espe-	With this function you can briefly sample all
cially useful when travelling, because it will	preset stations of a waveband. Choose the
always give you the most powerful stations at	desired SCANTIME in the DSC menu.
a fingertip as you pass through the various	• Briefly press PS/SCA.
reception areas.
	The radio will briefly play all the stored
• Press FMT for at least 2 seconds.
	stations of the tuned in waveband one
The radio will seek the six most powerful FM	after another.
stations and store them on the “T” memory	On FM, the system will sample the stations of
bank (Travelstore). As soon as this procedu-	one of the memory banks I, II, or T, depen-
re has finished, the first station will be played.	ding on which bank was selected before.
FM stations can also be stored manually on	Free preset buttons will be skipped.

the Travelstore memory bank (see “Storing To switch off Preset Scan:
stations”).	• Press PS/SCA once again.
	The radio will continue to play the cur-
	rently sampled station.

is flashing.

To continue listening to a sampled stati- on/switch Scan off:

•Briefly press PS/SCA.

If no station is selected during the search operation, the scan function will be automa- tically switched off after the entire frequency band has been passed through. The radio will then return to the initial station that was being played when the scan function was activated.

For more information, please also refer to chapter “DSC programming - SCANTIME”.

28