Blaupunkt RCM 104 Automatic seek tuning start, Adjusting the traffic message, Volume

Reception of traffic announcements with RDS-EON (Enhanced Other Networks)						DEUTSCH
Many FM broadcasters provide their service			Warning beep		Automatic seek tuning start
area with traffic messages at regular inter-			Whenever you leave the reception area of		Prerequisite:
vals.
			the traffic program station you have tuned		Priority for traffic announcements is activa-
All traffic program stations transmit a special						ENGLISH
			ximately 30 seconds.		If you leave the reception area of your traffic
telegram signal in addition to the radio pro-			into, you will hear a warning beep after appro-		ted.
gram, which is recognised and decoded by			This warning beep will also be released when		program while listening to a tape or disc or
the car radio. As soon as such a signal is
			pressing a preset without a traffic program.		when having turned down the volume com-
received, the display	shows	“TP” (Traffic				FRANÇAIS
					pletely, the car radio will automatically tune
Program).			Switching the warning beep off
					into another traffic program station.
Other radio stations	do not	air traffic an-
					If no such traffic program station is found
nouncements by themselves, but offer the			a) Tune to another traffic program station:
					within approximately 30 seconds, tape or
possibility to receive the traffic announce-			• Press the rocker switch, or
					disc reproduction will be interrupted and the	ITALIANO
ments of another station within the same
				offering traffic information.
					switch off the warning beep, proceed as
radio network. In this case, “TP” will light up			• press a preset button with a station		system will send out a warning beep. To
in the display as soon as the priority for traffic			Alternative:		described above.
announcements is activated. The display
			b) Switch off the priority for traffic an-			NEDERLAND
must then show “TA”.					Adjusting the traffic message
If a traffic announcement comes in, your			nouncements:
radio will automatically switch to the traffic			•	Press TA.	volume
program for the duration of the message and				In the display, the “TA” indication	The volume of the warning beep and of the
return to the previous station after the end of				goes out.		SVENSKA
					currently played traffic message has been
the message.			the pre-selected mute volume.
			You can reduce the beep tone volume to		pre-adjusted at the factory. However, you
Priority of traffic announcements			• For this purpose, press -dB.		can change this default setting using the
					DSC function (see “DSC programing - TA
ON/OFF
					LEVEL”).	ESPAGÑOL
activated, “TA” lights up in the display. To
If the priority of traffic announcements is
switch the function on/off:

•Press the TA.

PORTUGUES

29