Blaupunkt RCM 104 operating instructions Short description, Fmt

Short description

1Switching on:

Press ON (the KeyCard has to be in- serted), the set plays with the pre-adju- sted volume.

Switching off:

Press ON for approximately 1 second. If the set was turned on by pressing ON, the KeyCard can be used for swit- ching the system on and off (KeyCard = passive anti-theft protection).

The set may also be turned off via the vehicle’s ignition (provided that it was connected correspondingly). After the ignition was switched off, a double beep tone reminds you that you should remove the KeyCard before leaving your vehicle.

To operate the set when the ignition is switched off (KeyCard is inserted), pro- ceed as follows:

Press ON approximately 8 seconds after the ignition was switched off. The set will be turned on.

To protect the battery, the system will automatically shut off after a playing time of one hour.

2To change the volume: Press VOL+/VOL-.

Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX). You may also change the VOL FIX setting (see chapter “DSC pro- gramming”).

3FMT

Press this button to change the wave- band or memory bank in the following order:

•Change from MW/LW to FM. If FM is already activated, this function will be skipped.

•Switch between the memory banks I and II.

•Activate the Travelstore memory

bank

Extra function:

Store the six most powerful stations automatically with Travelstore: Press FMT until the search starts on the display.

4M•L

To change between medium wave (MW) and long wave (LW) frequencies.

5-dB- for instantly changing the volume Press the -dBbutton to instantly mute the audio source. The display will then show MUTE. Return to normal volume by pressing either the -dBbutton once again or the VOL+ button.

When pressing VOL-, the normal volu- me will be identical to the -dB(muted) volume.

To program the mute volume, proceed as follows:

•Adjust the desired volume.

•Press -dBfor approximately 2 se- conds (beep tone is released).

Diese Lautstärke ist als Mute-Lautstär- ke gespeichert.

This volume will then be stored as the mute volume.

Extra function:

Press this button to store the values set in the DSC menu.

DEUTSCH

ENGLISH

PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS

21