DSC programming
This car radio offers direct software control (DSC), which allows you to adapt a number of default settings to your preference and to store these values.
In the following you will find an overview of all the default settings adjusted at the factory. To change a programmed parameter,
•press DSC.
Then use the rocker switch and the
Select function
Change-Change-
settingsetting
Select function
CD NAME | Use this function to name |
(only, if | your discs (see also CD |
changer is | changer control, “Entering/ |
connected) | displaying CD names”) |
ANGLE | Use one of the values |
| or +1 to adapt the individual |
| viewing angle. |
| Adjust the ANGLE so as to |
| provide the best view. |
BEEP | Acknowledgement tone for |
| all functions where the re- |
| spective button has to be |
| held down for more than 2 |
| seconds to activate the |
| function. |
| Adjust volume between 0 |
| and 9 (0 = OFF). |
BRIGHT The display brightness can be adjusted between 1 and
16.You may set one day and one night adjust- ment.Brightness of night illumination:
Switch on the vehicle’s li- ghting system and program
the brightness value. For this, the lighting connector has to be connected to the electric system of the car.
COLOUR
(Variocolour) To gradually match the co- lours of the car radio and dashboard lighting to each other.
green ............. bright orange ............... red
CD DISP | During CD operation, use << |
(only, if | >> to select between the |
changer is | following displays: |
connected) | NAME – |
| |
| the name specified with CD |
| NAME. |
| TIME – |
| the playback time of the title. |
| NUMBER – |
| disc and track number. |
LED ON | You can select between LED |
| ON and LED OFF. When |
| setting LED ON, the Key- |
| Card tongue will flash for |
| optical theft protection when |
| the set is switched off and |
| the KeyCard removed. |
32
