SUPER MICRO Computer 5015A-EHF user manual Dimm Installation

SUPERSERVER 5015A-EHF User's Manual

Figure 5-3. DIMM Installation

1.Position the SO-DIMM mod- ule's bottom key so that it aligns with the receptive point on the slot.

2.Insert the SO-DIMM module vertically at about a 45 degree angle.

3.Press down until the module locks into place. The side clips will automatically secure the SO DIMM module, locking it into place.

4.To Remove: Use your thumbs to gently push the side clips near both ends away from the module. This should release it from the slot. Pull the SO DIMM module upwards.

Align

Insert this end first.

Locking clip

Press down until the module locks into place.

Locking clip

5-6