SUPERSERVER
2-5 Rack Mounting Instructions
This section provides information on installing the SC502 chassis into a rack unit There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using.
Installing the Chassis into a Rack
1.Confirm that chassis includes the four mounting screws required to mount the chassis into a rack
2.Align the thru holes of the chassis with the thru holes of the rack.
3.Insert the mounting screws into the thru holes in the front of the chassis and through the thru holes in the rack
Figure 2-1. Installing the Chassis into a Rack
Installing into a Telco Rack
The SC502 supports Telco Rack installation. The SC502 chassis compact design allows the chassis to be installed into a Telco rack without the use of rails.
Warning: do not pick up the server with the front handles. They are de- signed to pull the system from a rack only.
