SUPER MICRO Computer 5015A-EHF user manual System Fans, Drive Bay Installation/Removal

Chapter 6: Advanced Chassis Setup

6-3 System Fans

The SC502L is a fan-less chassis, which results in an extremely quiet and energy- efficient operation. The only fan in the system is located on the heatsink for the embedded processor.

6-4 Drive Bay Installation/Removal

Installling a 3.5" SATA Drive (Figure 6-3)

1.Power down the system and unplug the AC power cord.

2.Remove the chassis cover as described on page 2-6.

3.Use screws to secure the drive directly into the left side of the chassis as shown in the figure.

Installling 2.5" SATA Drives (Figure 6-4)

1.Power down the system and unplug the AC power cord.

2.Remove the chassis cover as described on page 2-6.

3.Use screws to secure the drive into the hard drive bracket: For two drives the bracket is p/n MCP-220-00044-0N.

For one drive the bracket is p/n MCP-220-00051-0N.

4.Use screws to secure the bracket/drive assembly into the left side of the chassis as shown in the figure.

Warning: Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site at http://www.supermicro.com/products/nfo/storage.cfm

6-3