SUPER MICRO Computer 5015A-EHF Sgpio 0/1 Headers, ATX PS/2 Keyboard and PS/2 Mouse Ports

SUPERSERVER 5015A-EHF User's Manual

T-SGPIO 0/1 Headers

Two T-SGPIO (Serial-Link General Purpose Input/Output) headers are located near the SATA connectors

SGPIO Header Pin Definitions

on the motherboard. These headers are used to communicate with the enclosure management chip in the system. See the table on the right for pin definitions. Refer to the board layout below for the locations of the headers.

Pin#

1

3

5

7

Definition

NC

Ground

Load

Clock

Pin 2 4 6 8

Definition

NC

DATA Out

Ground

NC

ATX PS/2 Keyboard and PS/2 Mouse Ports

The ATX PS/2 keyboard and the PS/2 mouse are located beside the USB0/1 ports. The mouse port is above the keyboard port. See the table on the right for pin definitions.

Universal Serial Bus (USB)

Four Universal Serial Bus ports (USB1/2/3/4) are located on the I/O backpanel. Additionally, one Type A USB port (USB10) and five USB headers (USB5/6, 7/8, 9) are pro- vided on the motherboard to provide front chassis access (cables are not included). See the tables on the right for pin definitions.

LAN1/2 (Ethernet Ports)

Two Ethernet ports (designated LAN1 and LAN2) are located beside the VGA port on the I/O backplane. These ports accept RJ45 type cables.

PS/2 Keyboard and

Mouse Port Pin

Definitions

Pin# Definition

1Data

2NC

3Ground

4VCC

5Clock

6NC

Back Panel USB Ports,

Type A USB Port Pin Definitions

	Pin#	Definition Pin# Definition
1		+5V	5	+5V
2		USB_PN	6	USB_PN
3		USB_PP	7	USB_PP
4		Ground	8	Ground
		Front Panel USB Header
		Pin Definitions
	Pin #	Definition	Pin #	Definition
	1	+5V		+5V
			6
	2	USB_PN		USB_PN
			7
	3	USB_PP		USB_PP
			8
	4	Ground		Ground
			9
	5	NA		Key
			10

5-14