Bay Technical Associates DS72 owner manual System, Network, Logged Users, Unit Reset, Driven

		DS72 HOST MODULE OWNER’S MANUAL
		DETAILED OPERATION AND CONFIGURATION
	Enter the desired Unit ID, followed by <cr.> The DS72 module stores the
	changes in non-volatile memory and returns to the configuration menu.
STATUS	From the main menu, type “S” to select “Status,” followed by <cr>. The
	following menu appears:
	DS-72 Status Menu.
	Enter selection, CR to exit.
	1)...System
	2)...Network Interface
	3)...Logged Users
	Enter Request :
SYSTEM	Select “1” to display the System Status:
	System Status:
	Available local memory (256 byte buffers): 21
	TCP sockets in use: 1
	System up time (hh:mm:ss): 00:04:27
NETWORK	Select “2” to display the Network Status:
	Network Status:
	Medium status: good
	Medium faults: 0
	Xmit bufr errs: 0
	Available send buffers: 11
	Receive queue status: open
LOGGED USERS	Select “3” to display the Logged Users:
	Active Users:
	User Address Internal Conn	Status
	1 * 200.4.2.52	+

I/O MODULES RESET From the main menu, type “RM” to select “I/O Modules Reset,” followed by <cr>. The DS72 module recycles power to all I/O ports on all peripheral modules and responds:

I/O Modules Reset Successfully. Strike CR to Continue

UNIT RESET

NOTE: Resetting the unit does not return user selections to their default settings.

	Use the menu driven selection or the ASCII character string method to
	reset the DS-Series Unit:
Menu	From the main menu, type “RU” to select “Reset Unit,” followed by
Driven	<cr>. The DS72 module resets the unit and responds:
Selection
	Reset Unit……

21