Bay Technical Associates DS72 owner manual Password, Menu

		DS72 HOST MODULE OWNER’S MANUAL
		DETAILED OPERATION AND CONFIGURATION
	Header is	Disabled
	Enable? (Y/N, CR for no change):
	Type “Y” followed by <cr>	if you want to enable Header status. Type “N”
	followed by <cr> if you want to disable Header. Enter <cr> for no change.
Password	To change Password or Enable/Disable Password upon login, select #2,
	“Password,” from the selection menu, followed by <cr>. Default Password
	is BTA, disabled. The DS72 module responds:
	Change Password	1
	Enable/Disable	2
	Exit	X, CR
	To change the current password, select #1, “Change Password,” followed by
	<cr>. The DS72 module responds:
	Enter New Password (1 - 8 char., CR to end):
	Enter the new password up to 8 ASCII characters followed by <cr>. The
	DS72 module stores the new password in non-volatile memory and returns
	to the selection menu.
	To toggle Password status, select #2, “Enable/Disable,” followed by <cr>.
	The DS72 module displays the current status and asks if you want to enable:
	Password is	Disabled

Enable? (Y/N, CR for no change):

	Enter “Y” followed by <cr> if you want to enable Password. Type “N”
	followed by <cr> if you want to disable Password. Enter <cr> for no
	change.
Menu	Enable/Disable Menu upon login. Default menu is enabled. If disabled,the
	following header appears upon login without the main menu:
	Data Switch Series - F.1.00
	Bay Technical Associates
	Unit ID: BAYTECH DS72
	Port Select Code: $BT
	Attention Character: ;
	NOTE: To invoke the main menu when disabled, enter the attention character five times (;;;;;).

16