KeyCard theft protection system

DEUTSCH

This car radio comes equipped with one KeyCard, but it can also be operated with a second card.

If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.

If you use two KeyCards, the settings stored on the first card will be transmitted to the second. However, you can individually store the following functions:

Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep vol- ume, LOW-EQ, HIGH-EQ.

In addition, the settings activated before the radio is switched off, such as the waveband, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity, ON VOL and SHARX will also remained stored.

This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

Putting the unit into operation

Turn on the set with ON.

To insert the KeyCard, unlock the operating panel by

pressing 1, the operating panel will fold down.

Insert the KeyCard with the contacts facing down as shown in the illustra- tion (arrow 1).

2

1

3

Push the card in the direction of the ar- row (2) and lock the operating panel back into position (arrow 3).

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display.

The system will switch off after approximate- ly ten seconds.

If another card type is inserted (e.g. phone or credit card), the display will show “WRONG KC” for approximately two sec- onds.

Remove the wrong card and insert the cor- rect KeyCard.

Press ON to turn on the set.

Removing the KeyCard

 

To unlock the operating panel:

 

• Press 1, the operating panel will fold

ENGLISH

down forwards.

• Push the card in to the right as far as

 

possible and remove it to the front.

 

• Push the operating panel back into po-

FRANÇAIS

sition.

For safety’s sake, the operating

 

panel must remain locked when

ITALIANO

the vehicle is in motion.

When you leave the vehicle, un-

lock the panel and remove the

 

KeyCard to protect the equipment

NEDERLANDS

against theft.

“Training” a second KeyCard/

Replacing a KeyCard

 

When the unit is in operation with the first

 

KeyCard, you can “train” a second one to

be also used with the set.

SVENSKA

 

If you want to “train” a second KeyCard:

ESPAÑOL

• Insert the first KeyCard and turn on the

set.

• Press the DSC button and press /

 

to select “LEARN KC”.

PORTUGUÊS

• Press << or >>.

The display will switch to “CHANGE”.

 

55

Page 14
Image 14
Blaupunkt RCM 169 Putting the unit into operation, Removing the KeyCard, Training a second KeyCard, Replacing a KeyCard