Blaupunkt RCM 169 Changing the memory bank FM, Storing stations, Recalling stored stations

Radio operation with RDS (Radio Data System)

Changing the memory bank (FM)

You can shift between the memory banks I,

IIand T in order to store stations and recall them later. The currently selected memory bank is indicated in the display.

•Press NEXT as often as necessary un- til the desired memory bank lights up in the display.

•Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, con- firmed by a beep).

Now the station has been stored.

Note:

Should you tune into a station which has already been stored before on another mem- ory bank, the corresponding preset button and the memory bank will flash briefly in the display.

Storing stations

On FM, you can store six stations on the preset buttons ST1 - ST6 for each of the memory banks I, II and T.

On MW/LW, you can also store six stations each.

•Press TU, menu level 2 will appear in the display.

•Press BND to select the waveband.

•Use the rocker switch to tune into a station (either automatically / or manually << >>).

Automatically storing the strongest stations with Travel- store

You can automatically store the six most powerful FM stations in your current recep- tion area sorted according to their signal strength. This function is particularly con- venient on longer trips.

•Press TU, menu level 2 will appear in the display.

•Press TS briefly.

“T-STORE” will flash in the display.

The six strongest FM stations will be auto- matically stored on the memory bank T (Travelstore). If it is not possible to receive six stations, the remaining presets will be marked by four dashes. When this process

has been completed, the radio will play the	DEUTSCH
station with the strongest reception (ST 1).
If desired, stations can also be stored man-	ENGLISH
ually on the Travelstore bank (see “Storing
stations”).

Recalling stored stations

You can recall any stored station at the touch	FRANÇAIS
of a button.
FM
Recall the stations on the waveband select-	ITALIANO
ed directly:
• by pressing ST1 - ST6.
To select a station on a different waveband:
	NEDERLANDS
• Press NEXT as often as necessary un-
til the desired memory bank appears
and then select the station by pressing
ST1 - ST6.
	SVENSKA
	ESPAÑOL
MW, LW
	PORTUGUÊS
You can select the stations stored for the
selected waveband directly:

61