TA VOL To adjust the traffic an- nouncement and beep tone volume from between 0 to 63.
The message will then come through at this volume, if the volume adjusted for the pro- gram is lower.
If the program volume is higher than the TA VOL lev- el, the traffic report will be played slightly louder.
LOUDNESS When listening at a low lev- el, the Loudness function creates a more natural sound by boosting the low
LO/DX To adjust the seek tuning sensitivity for local or distant stations.
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
DX - distant stations
DX 1 - high sensitivity
DX 3 - normal sensitivity
To quit the DSC programming mode and store the adjustment:
•Press DSC.
The DSC programming mode will be auto- matically quit 8 seconds after having made the last adjustment.
Specifications
Amplifier
Output power: 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V
4 x 35 W max. power
Tuner
Wavebands: |
|
FM : | 87.5 – 108 MHz |
FM sensitivity: | 1.0 ∝V at 26 dB |
|
FM frequency response:
35 - 16 000 Hz
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
frequency range. LOUD 1 - Low boost
Overview of DSC factory set-
Tape player
LOUD 6 - Max. boost
STEREO/MONO
You can select between stereo or mono sound.
tingsFrequency response:
40 - 15 000 Hz
REG | OFF |
RM | OFF |
READ KC | - |
LEARN KC | - |
LED | ON |
BEEP | 4 |
TA VOL | 35 |
LOUDNESS | 3 |
| STEREO |
DX | 1 |
Subject to modifications!
SVENSKA ESPAÑOL PORTUGUÊS
33
