DSC programming
DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them.
The basic settings for this audio equipment were made at the factory.
In the following you can find an overview of these settings, so that you can always reset to these if desired.
If you wish to alter any of the programming,
•press SCA/SRC to select one of the operating modes radio or cassette (cassette must be inserted).
•press DSC.
Use the rocker switch to select and adjust the functions described in the following. The display will show you the adjusted condition.
/
Select function
<<>> Adjust/recall value
REG ON/OFF REG ON – regional function is switched on.
REG OFF – regional func- tion is switched off.
Refer to “Radio operation with RDS / REG - regional programme”.
RM ON/OFF (Radio Monitor)
Allows you to listen to the radio during fast winding of the tape.
RM ON – Radio playback activated.
RM OFF – Function deacti- vated.
READ KC To read out the KeyCard data.
The KeyCard supplied with the radio is used to display the model name, type number (7 6..) and the serial number.
Using the second KeyCard to be purchased at any spe- cialised dealership it is pos- sible to display the Short Additional Memory (S.A.M.) data entered by the dealer.
See chapter “Short Addition- al Memory S.A.M.”.
LEARN KC To “train” a second Key- Card.
Please read the information in chapter “KeyCard theft protection system - Training a second KeyCard”.
LED ON/OFF You can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra
BEEP Acknowledgement tone for all functions which require a button to be pressed for more than 1 second.
The volume can be adjusted from between 0 to 9.
(0 = off)
32
