Blaupunkt RCR 127 Short Additional Memory S.A.M, Turn On Message T.O.M, Care of your KeyCard

In order to ensure that the KeyCard always functions correctly, it is important for the contacts to be free from any foreign parti- cles. Avoid direct skin contact.

If necessary, clean the KeyCard contacts using a cotton swab dipped in alcohol.

Optical indication of anti-theft protection

Flashing KeyCard tongue

When the vehicle is stationary and the Key- Card removed, the KeyCard tongue can be switched to flash for extra anti-theft securi- ty.

For this it is necessary that the positive pow- er supply line and the permanent +12 V lead are connected such as described in the in- stallation instructions.

Be sure that “LED ON” is adjusted in the DSC mode.

If required, please refer to chapter “DSC programming - LED”.

Switching off the flashlight

Short Additional Memory (S.A.M.)

Using the second KeyCard to be purchased at any specialised dealership, you can pro- gram a short text by selecting the DSC menu item READ KC. This text will be moved through the display and might be the tele- phone number of a car repair service or the emergency call number of your auto club.

Any specialised dealer with the proper equipment can program the desired text with up to a maximum of 162 characters onto the KeyCard.

Turn On Message (T.O.M.)

Using the second KeyCard to be purchased

at any specialised dealership, you can pro-

gram the unit to display a selected “Turn On The flashlight can be switched off by push-

Message” after the set is switched on.	ing in the KeyCard and lock.
	If you would like to deactivate the flashing
Any specialised dealer with the proper
	tongue with general effect, adjust the rele-
equipment can program the desired text with
	vant item in the DSC menu to “LED OFF”.
up to a maximum of 48 characters onto the
KeyCard.	Care of your KeyCard
Each time you switch on your car radio us-
ing the second KeyCard, this text will ap-
pear in the display.

Selecting the audio source

Using the SRC button you can switch be- tween radio and tape operation.

Tape operation is only available if a cassette is inserted.

To switch to another source,

•press SCA/SRC briefly.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

25