If desired, stations can also be stored man- ually on the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the memory bank with TS/FM.
•Press the corresponding preset button briefly to recall the station.
Scanning stored stations with Preset Scan
You can have all of the stored stations briefly scanned.
Note: | Loudness | |
If “TA” shows on the display panel, the sys- | Adjusts the low bass frequencies for a more | |
tem will scan the stored traffic stations only. | natural sound. | |
| ||
Selecting the seek tuning sensi- | Switching Loudness on/off: | |
• Press the AUD button for approximate- | ||
tivity | ||
You can alter the automatic seek tuning | ly 1 sec. | |
When the Loudness function is active, “LD” | ||
sensitivity. | ||
will light up in the display. | ||
|
If “lo” is displayed, the radio will only pick up See chapter “DSC programming” for more | ||
strong, local stations. | information. | |
If “lo” does not light up, the radio will also | ||
| ||
pick up weaker, distant stations. |
| |
Should you wish to alter the seek tuning |
| |
sensitivity, refer to chapter “DSC program- |
| |
ming – LO/DX”. |
| |
To start Preset Scan:
•Press SCA/SRC for approximately
1 sec. until “SCAN” appears in the dis- play.
All of the stored stations to be received in the selected waveband will be scanned one after the other. On FM, the radio will either scan the stations stored on memory bank I and II or T.
To select a scanned station and switch off Preset Scan:
•Press SCA/SRC for about 1 second.
Stereo - mono switching
The radio will only play in stereo if the ster- eo quality of the received station signal is sufficient. When the signal strength gets poor, the radio will gradually switch to mono. You can select between stereo or mono sound in the DSC menu.
For more information, refer to chapter “DSC programming – STEREO/MONO”.
Each time the radio is switched on, stereo sound is activated automatically.
28
