KeyCard theft protection system
This piece of equipment is supplied with one | The system will switch off after approximate- | • Push in the KeyCard. The card is re- | |
KeyCard, though you can also operate the | ly 10 seconds. | leased and put in the proper position | |
set with a second KeyCard. | When inserting another card type (e.g. | for being removed. | |
If you have lost your KeyCard or if it was | phone or credit card), the display will show | • Remove the first KeyCard and insert | |
damaged, you can buy a second / extra card | “WRONG KC” for approximately 2 seconds. | ||
the new one. | |||
from your specialised dealer. | The set will switch off automatically. | ||
After the display indication “READY” or | |||
When using a second KeyCard, the settings | Remove the wrong card and introduce the | ||
“LEARN KC”, | |||
stored on the first card will be adopted. How- | correct KeyCard. | ||
• press DSC. | |||
ever, you can individually store the follow- | • Turn the knob to switch on the set. | ||
Now you can also use the new KeyCard for | |||
ing functions: |
| ||
| operating your unit. | ||
Bass, treble, balance and fader settings, | Removing the KeyCard | ||
A maximum of two cards can be used for | |||
Loudness, TA (traffic announcement vol- | |||
| the set. | ||
ume), beep volume, lo or dx. | Never pull out the KeyCard directly! | ||
When trying to “train” a third one, the ac- | |||
In addition, the settings activated before | • First, slightly push in the KeyCard. | ||
cess authorisation for the KeyCard not used | |||
switching the radio off, such as the station | This releases the card and puts it in the prop- | ||
for the “training” process will be deleted au- | |||
tuned in, TA priority, AF and RM ON/OFF | |||
er position for being removed. | |||
tomatically. | |||
will also remain stored. | |||
• Now you can pull it out. | |||
| |||
This ensures that you will find your basic |
| ||
| Displaying the radio pass data | ||
settings | “Training” a second KeyCard/ | ||
as you have inserted your KeyCard. | Using the KeyCard supplied with your set | ||
| Replacing a KeyCard | ||
Putting the unit into operation | While operating the unit with the first Key- | you can have the radio pass data such as | |
the model name, product number (7 6..) and | |||
• Turn on the set. | Card, you can “train” a second one to be serial number indicated on the display pan- | ||
also used with the set: | el. | ||
With the KeyCard tongue sticking out, | |||
• Insert the first KeyCard and turn on the | Please refer to chapter “DSC programming | ||
introduce the KeyCard into the slot | |||
set. | - READ KC”. | ||
with the contact area showing up. | |||
• Press the DSC button and select |
| ||
The car radio is now ready for operation. |
| ||
“LEARN KC” with / . |
| ||
If a wrong KeyCard is inserted, then “CARD |
| ||
|
| ||
ERR” followed by “WAIT” will appear in the | • Press << or >>. |
| |
display. In this case please do not make any | The display will switch to “CHANGE”. |
| |
further adjustments. |
|
| |
24
