DSC programming
The car stereo has been equipped with DSC (Direct Software Control) to allow you to customize certain programmable, basic set- tings to suit your personal needs and pref- erences and then store them.
The basic settings for this audio equipment were made at the factory.
In the following you can find an overview of these settings, so that you can always reset to them if desired.
If you wish to alter any of the programming,
•press DSC.
Use the rocker switch and the ENT button to select and adjust the functions
LOW EQ | Equalizer setting: |
| This function has been set |
| To activate the frequencies |
| to “SHARX ON” at the facto- |
| and set the level for the low- |
| ry. |
| er frequency range. |
|
|
| Refer to the detailed instruc- | HICUT | |
| tions in the section on |
| the treble sound. Cuts the |
| “Equalizer setting”. |
| treble when interference oc- |
|
|
| curs. Can be adjusted from |
HIGH EQ | Equalizer setting: |
| NO HICUT (OFF) to HICUT |
| To activate the frequencies |
| 3 (highest setting). Which |
| and set the level for the up- |
| setting is the most pleasant |
| per frequency range. |
| is a matter of personal pref- |
| Refer to the detailed instruc- |
| erence. |
| tions in the section on |
|
|
| “Equalizer setting”. | LO/DX | To adjust the seek tuning |
|
|
| sensitivity. |
/ 
Select function
<</ >> Adjust/recall value
CD NAME Only available during CD playback.
Use this function to name your CDs. (See “Entering CD names”)
SHARX Switches the bandwidth in the FM frequency range. When there are a large number of stations within your current reception range, use << >> to switch to SHARX ON which will prevent most interference from adjacent radio stations.
“LO” stands for local recep- tion.
“DX” stands for distant re- ception.
Select “LO 3” if you want to receive strong stations in the local area, select “DX 1” if you want to tune into weaker stations which are further away.
30
