DSC programming
STEREO/MONO
Switch modes by pressing
<< >>.
The mode selected will ap- pear briefly in the display. The radio will begin with STEREO playback each time it is switched on.
CLOCKSET To set the clock manually. Press << >> to set the hours/minutes. Move to the next flashing position by pressing 
/ 
. To store the setting selected, press ENT briefly.
Also refer to the section on “CLOCK”.
CLK AUTO/MAN
Switches the hour correction function on/off. Read the in- formation in the section on “Clock, Deactivating the hour correction function”.
12/24H MODE
Select the clock display (12 or
CLK ON/OFF The clock display will ap- pear when the ignition is switched on, but the car stereo is switched off. In this case, set CLK ON.
ON VOL Use this function to select the volume at which the ra- dio is set when it is switched on.
Adjust the desired volume level with << >>.
When adjusted to “LAST VOL”, the system will come on at the volume selected before it was switched off.
BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second.
The volume can be adjusted from between 0 to 9.
(0 = off)
DIM DAY Use this function to select the display brightness for the daytime (from 1 to 9).
DIM NIGHT Use this function to select the display brightness for the
The brightness changes ac- cordingly when the car headlights are switched on/off.
ANGLE Adjusts the display to the in- dividual viewing angle.
SCANTIME Use this function to set the scan time for the radio or CD player from 5 to 30 sec- onds.
AUX ON/OFF
This menu item will not ap- pear if a CD changer has been connected to the sys- tem. The factory setting is “OFF”.
If another system compo- nent is connected to AUX, this setting must be altered to “AUX ON”.
ENGLISH
31
