SWITCHING ON AND OFF
Switching On and Off
The device can be switched on and off in the following ways:
Switching On and Off with the Vehicle Ignition
If the device is correctly connected to the vehicle ignition, and has not been switched off with button 3, it is switched on and off along with the ignition.
To switch the device on when the igni- tion is off:
➮Press button 3.
Note:
●To protect the vehicle battery, the device is automatically switched off after an hour if the vehicle ignition is off.
Switching On and Off with the Release Panel
➮Remove the release panel. The device switches off.
➮Replace the release panel.
The device switches on. The most re- cent settings (radio, cassette, CD- changer or AUX) are restored.
Switching On / Off with button 3
➮Press button 3 to switch on.
➮To switch off, hold button 3 pressed for longer than two sec- onds.
The device switches off.
Switching on by inserting a cassette
If there is no cassette in the device when it is switched off:
➮Press the 
button 9. The flip release panel opens.
➮Push the cassette gently into the device, with the open side to the right, until you feel it stop.
The cassette is then automatically drawn into the device.
While the cassette is being drawn in, do not push or pull it.
➮Close the panel with a gentle push until it locks.
The device switches on. The cassette starts playing.
36
