Blodgett KTT-E Series manual Comply Will Void Warranty

Models: KTT-E Series

1 20
Download 20 pages 15.66 Kb
Page 10
Image 10
COMPLY WILL VOID WARRANTY.

4.0CLEANING INSTRUCTIONS

The kettle interior and exterior should be thoroughly washed after each use in preparation of a different food.

1.Add water and mild detergent to the kettle immediately after use.

2.Scrub kettle interior with nylon brush.

NOTE

NEVER SCRAPE THE INSIDE OF THE KETTLE WITH METAL TOOLS, STEEL SCOURING PADS, OR ABRASIVE CLEANERS. SCRATCHES WILL RESULT WHICH WILL SPOIL THE KETTLE’S GENERAL APPEARANCE AND MAKE IT HARDER TO CLEAN AND MAINTAIN A SANITARY CONDITION.

3.Loosen food which is stuck to kettle by allowing it to soak at a low temperature setting.

4.Rinse with clear water and dry.

WARNING

DO NOT HOSE DOWN APPLIANCE UNDER ANY CONDITION. FAILURE TO

COMPLY WILL VOID WARRANTY.

5. Wipe down exterior, rinse and dry.

WARNING

IT IS NOT RECOMMENDED TO USE CLEANING AGENTS THAT ARE

CORROSIVE.

Use of cleaning agents that contain chloride, acids or salts are corrosive and may cause pitting and corrosion when used over a period of time; this will reduce the life of the appliance.

Should pitting or corrosion occur this is not covered by warranty.

Follow the recommended cleaning instructions. Use a mild detergent, warm water and rinse thoroughly.

10

Page 10
Image 10
Blodgett KTT-E Series manual Comply Will Void Warranty