3.0OPERATION INSTRUCTIONS (Continued)
7.When cooking is finished set thermostat knob and power switch to the OFF position.
8.Pour finished product from kettle using tilt handle. Be careful to avoid splashing.
9.Add water to kettle for cleaning purposes.
10.Wash kettle thoroughly. See CLEANING procedure.
TILTING INSTRUCTIONS
Your kettle has the standard “Clean Lock” feature and may not be tilted without disengaging the tilt knob located on the console at the top right. This feature locks the kettle in the upright position and also allows the operator to lock the kettle at 105 degrees for ease of cleaning. To tilt the kettle the full distance, the tilt lock knob must be disengaged from the cleaning position by pulling out the tilt lock knob and tilting the kettle forward the full distance. Follow these steps to tilt kettle:
1.Pull out the tilt knob near top right of console.
2.Using kettle tilt handle pull kettle forward to desired angle of pour or until kettle locks at 105 degrees. The tilt knob can be released after the kettle has been tilted approximately 10E.
3.Kettle will lock in position at 105 degrees and may be tilted further by pulling the tilt lock knob a second time allowing the kettle to tilt the full distance.
4.To return the kettle to the upright position, pull out the tilt lock knob and tilt the kettle upward until it locks in the upright position. The kettle should not move in either direction once in the upright position.
9
