ENGLISH
8 – Messages
Error messages
If one of the following messages should appear, press
the 
(stop) button and then deal with the cause of the error. If you are still unable to resolve the prob- lem, please contact service center nearby.
•Can’t Rec!
Cannot record. Either erase the contents of the disc (for a
•Disc Error!
There is a problem with the disc. Use a different disc.
•Disc Full!
Recording is not possible because there is no more recordable time or recordable track on the disc.
•Text Full!
You have reached the maximum number of char- acters.
•Sure? Text!
After editing text, you attempted to open the tray without finalizing. If you wish to proceed (and discard the text you entered), press the 
(Open/Close) button once again.
•Drive Error!
There is a problem with the
•D-IN UNLOCK!
No digital unit is connected to the DIGITAL IN jack (or the power of the connected digital unit is turned off). Check the connection and power of your digital unit.
•Not Audio!
The signal being received at the DIGITAL IN jack is not an audio signal.
•Erase Error!
An error occurred while erasing.
•Not Fs44.1k!
The sampling frequency of the digital input is not 44.1 kHz. Please turn the SRC on.
•PGM Empty!
Nothing has been programmed.
•PGM Full!
You have already programmed 99 songs.
•Format Err!
This format cannot be read on the unit.
•Can’t Edit!
The editing operation cannot be executed due to operational restrictions.
•Can’t Sel!
The menu or other item cannot be selected because it is prohibited.
•Can’t INCR!
The track cannot be incremented because M_TR_INCR is OFF.
•Rec Error!
An error occurred while recording. Please re- record.
•No DIR!
There is no directory that contains a file.
•Decode Err!
Failed to playback an MP3 file.
Messages during operation
•Blank Disc
An unrecorded disc is inserted.
•Complete
An operation such as finalize or erase has been completed.
•Now OPC.
Calibration is being performed to match the char- acteristics of the disc being used so that it can be recorded optimally.
•Disc Repair
The disc is being repaired.
•PMA Writing (PMA = Program Memory Area)
The recorded content is being written to the disc.
•TOC Reading.
TOC data is being read.
36
