Marantz CDR632 manual CD-R/CD-RWdisc operations, Finalizing, Un-finalizing, 3Press the ENTER button

6 – CD-R/CD-RW disc operations

Caution

Be careful that the power is not accidentally turned off while the finalize, un-finalize, refresh, or disc/track erase operations are being executed. If this occurs, the data on the disc will be corrupted, and it is also possible that the disc itself will become unusable.

This section explains various operations that you can perform on a CD-R/CD-RW disc, such as finalizing a recorded CD-R/CD-RW disc so that it can be played on a conventional CD player, or erasing all or part of the tracks on a CD-RW disc.

4To execute the operation, press the ENTER button once again.

Finalization will begin, and the display will indi- cate the estimated time remaining until comple- tion as “TOC X:XX”.

When finalization is finished, the display will indicate “Complete”. All operating buttons are disabled while finalization is being performed.

ENGLISH

Finalizing

Finalizing is the operation of writing the TOC (Table Of Contents: information about the recorded data, such as the number of songs and the playback start time of each song) to the CD-R/CD-RW media.

A disc recorded on the CDR632 cannot be played back on a conventional CD player until the final TOC has been written to the disc. (The CDR632 itself will be able to play the disc even before it has been final- ized.)

Normally, no additional recording can be done on CD-R/CD-RW media once it has been finalized. However in the case of a CD-RW, you can “un- finalize” the disc so that additional recording can be performed.

1 3, 4

2

1Insert a recorded CD-R/CD-RW disc into the disc tray.

2While stopped, press the FINALIZE/INS but- ton on the front panel or the FINALIZE but- ton on the remote control unit.

The display will indicate “FINALIZE?”.

If you decide to cancel the operation, press the FINALIZE/INS button (or the FINALIZE button on the remote control unit) once again.

3Press the ENTER button.

Un-finalizing

Un-finalizing is an operation that allows further recording on a CD-RW disc that has been finalized.

1 3, 4

2

1Insert a finalized CD-RW disc into the disc tray.

2While stopped, press the ERASE/DEL button on the front panel (or the ERASE button on the remote control unit), and use the MULTI JOG dial (or the SKIP buttons on the remote control unit) to select “UNFINALIZE?”.

If you decide to cancel the operation, press the ERASE/DEL button (or the remote control unit SKIP buttons) once again.

3Press the ENTER button.

The display will indicate “Sure?”.

If you decide to cancel the operation, press the STOP button.

4To execute the operation, press the ENTER button once again.

Un-finalization will begin, and the display will indicate the estimated time remaining until com- pletion as “Erase X:XX”.

When un-finalization is finished, the display will indicate “Complete”.

The display will indicate “Sure?”.

If you decide to cancel the operation, press the STOP button.

31