2 – Front and rear panel
Front panel
1 | 2 | 3 456 7 | 8 | 9 0A |
ENGLISH |
|
|
|
|
B C | D E F G H I J K L |
1POWER switch | 0DISPLAY button |
Turns the power on/off.
2Disc tray
Insert a disc (CD,
3
(Open/Close) button
Opens or closes the disc tray. The display will indicate “Open” when the tray is opened, or “Close” when the tray is closed.
4REPEAT button
Switches the repeat playback function on/off.
5PITCH button
Switches pitch control on/off.
6INPUT SELECT button
Selects the input jacks that will be the recording source.
7Remote signal sensor
Receives commands from the RC632CDR (remote control unit). Be aware that if there are obstructions in front of this sensor, commands may not be received successfully.
8Display
Displays menus and the current operating status.
9MENU button
Accesses the Menu mode (→ p.12) where you can use various menu items.
Switches the time mode shown on the display. When entering text, this button switches the type of characters (upper or lower case) being input.
AMULTI JOG dial
This is used to select tracks or to edit the value of a setting. This dial can be pressed to operate as an ENTER button to finalize a selected menu item or an edited value.
BTIMER switch
Switches the timer playback function (→ p.19) on/off.
CHEADPHONE jack/LEVEL control
You can connect a set of stereo headphones to this jack. The LEVEL control located at the right adjusts the volume of the headphones.
DINPUT controls
This is a level control for the analog inputs. The outside ring controls the level of the left channel, and the inside knob controls the level of the right channel. Normally, turning one will cause both to turn together. However by holding one of them, you can adjust the left and right levels indepen- dently.
EFINALIZE/INS button
Executes the Finalize operation for a disc (→ p.31). When entering text, this button inserts a space at the cursor location.
8
