4 – Playback—Track search
Track search
During playback (or while paused), you can search to find the portion of the track you want to hear. You can search either in the normal way by
ENGLISH | (direct search). |
| |
| Normal search |
SEARCH buttons 
Here’s how to use the remote control unit SEARCH buttons to search through a track while listening to the audio.
1Play or pause the desired track.2Hold down one of the SEARCH buttons on the remote control unit.
Search will begin in either the forward ( 
) or reverse ( 
) direction.
You will return to the state (playing or paused) in which you were before searching.
Note
You cannot use normal search in an MP3 file.
Direct search
Here’s how to search by directly specifying the desired track or time (direct search).
1
2
1To perform a direct search, use the
•Track number (three digits)
•Elapsed time (minutes) from the beginning of the track (three digits)
•Elapsed time (seconds) from the beginning of the track (two digits)
For example to specify the location at 1 minute 30 seconds into track 2, press the buttons in the fol- lowing order.
0 → 0 → 2 → 0 → 0 → 1 → 3 → 0
You will immediately move to the specified loca- tion as soon as you finish entering the eight digits.
Note
•You can use direct search whether the track is stopped, playing, or paused.
•If you perform direct search while stopped or playing, playback will begin from the location you specify. If you perform direct search while paused, the disc will be paused at the location you specify.
•You can’t use direct search in Program or Shuffle mode.
Caution
•If an MP3 disc is inserted, you will not be able to specify a time location within a track. The specified track will play when you enter the track number (the first three digits).
•If you specify a track number or time that does not exist on the currently inserted disc, the search opera- tion will be cancelled at that point.
16
