Marantz CDR632 manual Playback, Types of disc that can be played, Basic playback operation

ENGLISH

4 – Playback

This section explains how to playback CD/CD-R/CD- RW media inserted in the disc tray, and how to playback MP3 format audio files from media such as CD-ROM.

Types of disc that can be played

The CDR632 can play the following types of disc.

•Commercial audio CDs recorded in CD-DA format

•CD-R/CD-RW discs recorded in CD-DA format

•CD-ROM/CD-R/CD-RW discs containing MP3 format files

Note

•The CDR632 can playback MP3 files that are recorded in ISO9660 level 1, level 2, or Joliet formats. It can also playback discs that were recorded as multi- session discs.

•The following limitations apply to the number of MP3 files and directories.

Maximum number of directories: 255

Maximum number of layers: 8

Maximum number of MP3 files: 999 Maximum length of MP3 directory names, file names, and ID3 tags: 255 characters

•Regarding MP3 track information

During playback, this information is shown in the dis- play with a priority order of ID3v2 > ID3v1 > file name. While stopped, the file name is shown.

Caution

MP3 files encoded with a sample rate other than 44.1 kHz cannot be played back correctly. The recommended format is 44.1 kHz sampling rate and 128 kbps or higher bit rate.

Basic playback operation

This section explains the procedure for basic opera- tions such as play, pause, and stop.

4 3, 5

2 1 6

1If you’re monitoring through headphones, connect your headphones to the PHONES jack and turn down the LEVEL control.

2Press the POWER switch to turn on the power.

3Press the (Open/Close) button to open the disc tray.

4Place the disc on the tray with the label fac- ing upward.

5Press the (Open/Close) button to close the tray.

The display will indicate “Close”. When the disc tray has closed completely, the display will change to “TOC Reading.”.

When the disc has been read, the display will indicate the total number of tracks and the total playback time.

Disc type	Total number of tracks
		Total playback time

	Track number indicator
The type of disc inserted is shown as follows.
CD:	Commercial audio CD
CD-R:	CD-R media
CD-RW:	CD-RW media

NO TOC: CD-R or CD-RW media that has not been finalized

6To start playback, press the (play) but- ton.

Operate the connected monitor system or the HEADPHONE LEVEL control to adjust the monitor level appropriately.

To pause or stop, proceed as follows.

To pause playback

Press the (pause) button. Press the (play) button once again to resume playback.

To stop playback

Press the (stop) button.

Note

Unless otherwise specified, the explanations in this man- ual assume that the playback modes (→ p.17) is set to Continue Play.

14